抛光树脂

零售价

0.0

元

市场价

0.0

元

浏览量:

1000

产品编号

所属分类

离子交换树脂

数量

库存:

所属分类

返回列表



产品中心

产品描述

参数

产品名称类型离子形态总交换容量（eq/L）含水量(%) 堆积密度(g/L) 最高使用温度℃ 主要用途及特点 Amberlite IR120Na 凝胶强酸阳树脂 Na 2.0 45-50 820 130 物理和化学稳定性好，选择性、交换容量高。适合水的软化和除盐 Amberlite SR1L Na 凝胶强酸阳树脂 Na 2.05 41-49 820 130 食品级树脂，无毒无害，具有交换容量高，抗渗透性能好的特点。 Amberlite IRA402CL 凝胶强碱阴树脂 CL 1.2 49-60 670 60 抗污染性能好，含水量高，适合于水除盐 Amberjet 1200Na 凝胶强酸均粒阳树脂 Na 2.0 43-47 850 130 所有水处理的软化、除盐系统。并可与Amberjet 4200CL结合使用于混床。适用于所有床型，可替代普通强酸树脂 Amberjet 4200CL 凝胶强酸均粒阴树脂 CL 1.3 49-55 670 60 良好的物理性能，再生效率高，抗污染性能好，适合于水除盐，和Amberjet 1200Na结合专用于混床 Amberjet 1000Na 凝胶强酸均粒阳树脂 Na 2.0 43-50 850 130 良好的物理性能，再生效率高，抗污染性能好。适合于水除盐，和Amberjet 4000CL结合用于混床 Amberjet 4000CL 凝胶强酸均粒阴树脂 CL 1.3 49-55 670 60 良好的物理性能，再生效率高，抗污染性能好，适合于水除盐，和Amberjet 1000Na结合专用于混床 Amberlite IRC76CRF 大孔弱酸丙烯酸系阳树脂 H 4.2 45-55 760 120 适用于水的脱碱度和软化，及高碱度水的除盐 Amberlite IRA96CRF 大孔弱碱阴树脂 FB 1.4 48-58 685 100 抗渗透冲击性能和抗污染性能好，适用于工业水处理、纯水制备和废水处理等

　　BASIC RESIN PROPERTIES
For high purity regenerated mixed beds, UPW
performance is much more significant than basic
resin properties. It is still important to know that
the resins used in the application are of the
highest quality. The typical properties of the
resins used in AMBERJET UP6150 are shown
below.
These values are listed to show that both the
cation and anion resins used to make AMBERJET
UP6150 meet the standards for high capacity,
uniform particle size ion exchange resins.
Cation H
+ Anion OH
–
Moisture holding capacity, %_________________ 44.0 - 54.0 54.0 - 64.0
Total exchange capacity, eq/L ________________ ≥ 1.8 ≥ 1.00
Harmonic mean size, µm_____________________ 580 to 680 580 to 690
Uniformity coefficient _______________________ ≤ 1.20 ≤ 1.25
H form % of sites ________________________ ≥ 99 -
OH form % of sites ________________________ - ≥ 95.0
Cl form, % of sites ________________________ - ≤ 0.5
CO3 form % of sites ________________________ - ≤ 5.0
SO4 form % of sites ________________________ - ≤ 0.1

Feed water temperature______________________ 15 to 25°C (60 to 77°F)
Minimum bed depth ________________________ 900 mm (3 feet)
Service flow rate (working mixed bed) _________ 20 to 30 BV*/h
Service flow rate (polishing mixed bed) ________ 30 to 40 BV/h
Recommended influent water quality
for polishing mixed bed application
Inlet Resistivity ____________________________ > 16 MΩ·cm

扫二维码用手机看